Browse Results

Showing 7,626 through 7,650 of 100,000 results

Preference Modelling (Lecture Notes in Economics and Mathematical Systems #250)

by Marc Roubens Philippe Vincke

The following scheme summarizes the different families introduced in this chapter and the connections between them. Family of interval orders f Row-homogeneous Column-homogeneous Family of family of interval semi orders family of interval orders orders Homogeneous family of i nterva 1 orders Homogeneous family of semi orders Family of weak orders 85 5.13. EXAMPLES We let to the reader the verification of the following assertions. Example 1 is a family of interval orders which is neither row-homogeneous nor column-homogeneous. Example 2 is a column-homogeneous family of interval orders which is not row-homogeneous but where each interval order is a semiorder. Example 3 is an homogeneous family of interval orders which are not semiorders. Example 4 is an homogeneous family of semi orders . . 8 ~ __ --,b ~---i>---_ C a .2 d c Example Example 2 .8 .6 c .5 a 0 a d Example 3 Example 4 5.14. REFERENCES DOIGNON. J.-P •• Generalizations of interval orders. in E. Degreef and J. Van Buggenhaut (eds). T~ndS in MathematiaaZ PsyahoZogy. Elsevier Science Publishers B.V. (North-Holland), Amsterdam, 1984. FISHBURN. P.C., Intransitive indifference with unequal indifference intervals. J. Math. Psyaho.~ 7 (1970) 144-149. FISHBURN. P.C., Binary choice probabilities: on the varieties of stochastic transitivity. J. Math. Psyaho.~ 10 (1973) 327-352.

Programming the Built Environment (Routledge Revivals)

by Wolfgang F. E. Preiser

Architectural programming – the analysis of any given environment to satisfy users’ needs – has become a given prerequisite to the design process. The programming process is often a complicated one: users’ present and future needs must be identified; space allowances, often predetermined, must be considered; equipment must be accommodated; all in the most cost-effective way possible. The variety of user groups is as wide as the variety of functions architecture can shelter; moreover, the different structures and needs of clients that fall within the same use classification differs so greatly that every program presents a new challenge. You cannot, for example, use the same program for every hospital you design. In Programming the Built Environment, first published in 1985, noted architect Wolfgang F. E. Preiser has compiled a wide range of architectural programs demonstrating applications of basic principles for different client groups. This book will be of interest to students of architecture and planning.

Programming the Built Environment (Routledge Revivals)

by Wolfgang F. E. Preiser

Architectural programming – the analysis of any given environment to satisfy users’ needs – has become a given prerequisite to the design process. The programming process is often a complicated one: users’ present and future needs must be identified; space allowances, often predetermined, must be considered; equipment must be accommodated; all in the most cost-effective way possible. The variety of user groups is as wide as the variety of functions architecture can shelter; moreover, the different structures and needs of clients that fall within the same use classification differs so greatly that every program presents a new challenge. You cannot, for example, use the same program for every hospital you design. In Programming the Built Environment, first published in 1985, noted architect Wolfgang F. E. Preiser has compiled a wide range of architectural programs demonstrating applications of basic principles for different client groups. This book will be of interest to students of architecture and planning.

Prospects for Recovery in the British Economy (Routledge Revivals)

by F. V. Meyer

First published in 1985, Prospects for Recovery in the British Economy examines the origins of the economic downturn of the early 1980s. The book explores the causes of the decrease in industrial production and employment during the early 1980s and considers the longer-term cyclical problems of the British economy. In doing so, it provides a detailed study on downturn and recovery from a variety of perspectives. Topics covered include the role of the financial markets; the decline in profitability and productivity in the manufacturing industry; and, the social implications of long-term trends. Prospects for Recovery in the British Economy is ideal for those with an interest in the history of the British economy and the history of economic thought.

Prospects for Recovery in the British Economy (Routledge Revivals)

by F. V. Meyer

First published in 1985, Prospects for Recovery in the British Economy examines the origins of the economic downturn of the early 1980s. The book explores the causes of the decrease in industrial production and employment during the early 1980s and considers the longer-term cyclical problems of the British economy. In doing so, it provides a detailed study on downturn and recovery from a variety of perspectives. Topics covered include the role of the financial markets; the decline in profitability and productivity in the manufacturing industry; and, the social implications of long-term trends. Prospects for Recovery in the British Economy is ideal for those with an interest in the history of the British economy and the history of economic thought.

Prospects for the World Oil Industry (Routledge Library Editions: The Economics and Politics of Oil and Gas)

by Tim Niblock Richard Lawless

Written in 1985, at a time when the world oil industry was facing a difficult period of over-supply and falling prices, this book examines some of the most important strategic issues facing both the producers and consumers of oil and gas. A theme underlying al the papers is the need for strengthening the co-operation between producing and consuming nations, especially between the Arab Gulf States and the members of the EU. The security of supply is also examined in the light of regional instability and peace in the Middle East.

Prospects for the World Oil Industry (Routledge Library Editions: The Economics and Politics of Oil and Gas)

by Tim Niblock Richard Lawless

Written in 1985, at a time when the world oil industry was facing a difficult period of over-supply and falling prices, this book examines some of the most important strategic issues facing both the producers and consumers of oil and gas. A theme underlying al the papers is the need for strengthening the co-operation between producing and consuming nations, especially between the Arab Gulf States and the members of the EU. The security of supply is also examined in the light of regional instability and peace in the Middle East.

Public Expenditure Policy

by Paul Cockle

Questions and Answers on Finance of International Trade (Banking and Finance Series #4)

by L. Waxman

This revision guide is intended to serve as a complement to the textbook. Its aim is essentially to provide past examination questions set by the Institute of Bankers and the examiners' own answers together with past questions set at the City of London Polytechnic and other questions, with their answers. This gives the reader a wider range of topics which reflects the contents of the textbook, and permits of selectivity to meet need. It is suggested that as each textbook chapter is read, the relevant section in the Revision Guide should be attempted in order to test knowledge and understanding, thereby further enhancing the learning process. To facilitate this, the guide is set out section by section, to match the chapters in the textbook. Several sections are prefaced by introductions to bridge the gap between textbook and questions. In addition, questions are presented in succeeding order of difficulty so that readers can move from the less to the more complex at their own speed. November 1985 L. Waxman vii Passing the Examination The Banking Diploma Stage 2 Examination Finance ofInternational Trade. The Institute of Bankers Diploma examinations take place twice yearly, in April and September. Prospective candidates who wish to prepare themselves as thoroughly as possible and who are using the associated textbook to this revision guide will find the question and answers which it contains an indispensable means of preparation for the examination paper "Finance ofInternational Trade".

Raw Materials Purchasing: An Operational Research Approach (Frontiers of Operational FORS #Volume 4)

by B. G. Kingsman

A systematic study of commodity purchasing analysed from an operational research viewpoint and based on numerous case studies.

Readings and Exercises in Organizational Behavior

by Jane W. Gibson Richard M. Hodgetts

Reading and Exercises in Organizational Behavior covers readings and exercises on organizational behavior. The book presents articles on organizational behavior foundations, individual behavior in organizations, as well as group behavior in organizations. The text also includes articles on organizational design, job design, and the effects of job stress on performance. Articles on organizational processes dealing with decision making, communication, and performance appraisal are also considered. The book concludes by demonstrating articles on the nature and scope of organizational effectiveness, including topics on organizational climate, organizational change, and organizational development. Behavioral psychologists and students taking organizational behavior courses will find the text invaluable.

The Reality of Organizations: A Guide for Managers

by Rosemary Stewart

Report On Guatemala: Findings Of The Study Group On United States-guatemalan Relations

by The Johns Hopkins Foreign Policy Institute, School of Advanced International Studies (SAIS)

The findings of the Study Group on United States-Guatemalan Relations,organized under the auspices of the Central American and Caribbean Program(CACP) at the School of Advanced International Studies, The Johns HopkinsUniversity, focus on the nature of Guatemalan politics, possibilities for democratization,and the options available to U.S. policymakers during the regime ofGeneral Rios Montt. Also included in this book are two papers, commissioned by the CACP, that present starkly contrasting views of Guatemala in order to provide a background for the study group's discussions. As anticipated by study group members, the Rios Montt regime fell from power after the initial writing of this report, but their findings nevertheless provide an excellent overview of the debate on U.S. policy toward Guatemala.

Report On Guatemala: Findings Of The Study Group On United States-guatemalan Relations

by The Johns Hopkins Foreign Policy Institute, School of Advanced International Studies (SAIS)

The findings of the Study Group on United States-Guatemalan Relations,organized under the auspices of the Central American and Caribbean Program(CACP) at the School of Advanced International Studies, The Johns HopkinsUniversity, focus on the nature of Guatemalan politics, possibilities for democratization,and the options available to U.S. policymakers during the regime ofGeneral Rios Montt. Also included in this book are two papers, commissioned by the CACP, that present starkly contrasting views of Guatemala in order to provide a background for the study group's discussions. As anticipated by study group members, the Rios Montt regime fell from power after the initial writing of this report, but their findings nevertheless provide an excellent overview of the debate on U.S. policy toward Guatemala.

A Revolution in Manufacturing: The SMED System

by Shigeo Shingo

Written by the industrial engineer who developed SMED (single-minute exchange of die) for Toyota, A Revolution in Manufacturing provides a full overview of this powerful just in time production tool. It offers the most complete and detailed instructions available anywhere for transforming a manufacturing environment in ways that will speed up produ

A Revolution in Manufacturing: The SMED System

by Shigeo Shingo

Written by the industrial engineer who developed SMED (single-minute exchange of die) for Toyota, A Revolution in Manufacturing provides a full overview of this powerful just in time production tool. It offers the most complete and detailed instructions available anywhere for transforming a manufacturing environment in ways that will speed up produ

Refine Search

Showing 7,626 through 7,650 of 100,000 results