- Table View
- List View
Masterkurs Parallele und Verteilte Systeme: Grundlagen und Programmierung von Multicoreprozessoren, Multiprozessoren, Cluster und Grid
by Günther Bengel Christian Baun Marcel Kunze Karl-Uwe StuckyDas Buch bietet eine systematische Darstellung des Stands der Technik und der aktuellen Entwicklungen auf dem Gebiet des parallelen und verteilten Rechnens. Es stellt alle relevanten Hardwarearchitekturen für Multiprozessoren und Multicoreprozessoren sowie ihre Betriebssysteme bis hin zum Google-Cluster vor. Das parallele Programmieren bildet einen Schwerpunkt des Werkes. Dazu gehören Client-Server-Modelle und Serviceorientierte Architekturen sowie Programmiermodelle für unterschiedliche Speicherarchitekturen. Eine ausführliche Erläuterung von Leistungsmaßen, Parallelisierungstechniken und verteilten Algorithmen zeigt dem Programmierer Möglichkeiten und Grenzen der Verteilung auf. Methoden der statischen und der dynamischen Rechenlastverteilung sind ebenso enthalten wie moderne Virtualisierungstechniken. Die abschließenden Kapitel über Cluster- und Grid-Computing geben Einblick in die aktuellen Themen des Gebiets und einen Ausblick auf die zukünftigen Entwicklungen.
Masters of the Structural Aesthetic
by Derek ThomasThis book highlights aesthetics as pertaining to the structural component in architectural design. This less explored aspect of architecture is discussed and explains the enduring qualities of ten specific buildings from architectural history to present day due to their structural aesthetics. Based on comprehensive research, a critical analysis is presented of the constraints and other influences on architectural and structural design, such as culture, patronage, geometry, available resources and technologies.
Masters of the Word: How Media Shaped History
by William L BernsteinFrom the author of A Splendid Exchange comes a remarkable history of media - from the alphabet to the internet - that examines how it has shaped human society over millennia.In Masters of the Word, Bernstein chronicles the development of the technology of human communication, or media, starting with the birth of writing thousands of years ago in Mesopotamia. In Sumer, and then Egypt, this revolutionary tool allowed rulers to extend their control far and wide, giving rise to the world's first empires. When Phoenician traders took their alphabet to Greece, literacy's first boom led to the birth of drama and democracy. In Rome, it helped spell the downfall of Empire. As Bernstein illustrates, new communication technologies - from the clay tablet to the radio - have all had a profound effect on human society. But it's not just the technologies themselves that have changed the world, it's access to them. Medieval scriptoria and vernacular bibles gave rise to religious dissent, but it was only when the combination of cheaper paper and Gutenberg's printing press drove down the cost of books by some 97% that the dynamite of Reformation was lit. The Industrial Revolution brought the telegraph and the steam driven printing press, allowing information to move faster than ever before and to reach an even larger audience. But along with radio and television, these new technologies were more easily exploited by the powerful, as seen in Germany, the Soviet Union, and even Rwanda, where radio incited genocide. With the rise of carbon duplicates (Russian samizdat), photocopying (the Pentagon Papers), and the internet and mobile phones (the Arab Spring), access has again spread and the world is both more connected, and more free, than ever before.
Masters Theses in the Pure and Applied Sciences: Accepted by Colleges and Universities of the United States and Canada Volume 39
by Wade H. ShaferMasters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 39 (thesis year 1994) a total of 13,953 thesis titles from 21 Canadian and 159 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 39 reports theses submitted in 1994, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.
Masters Theses in the Pure and Applied Sciences: Accepted by Colleges and Universities of the United States and Canada Volume 34
by Wade H. ShaferMasters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 34 (thesis year 1989) a total of 13,377 theses titles from 26 Canadian and 184 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 34 reports theses submitted in 1989, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Masters Theses in the Pure and Applied Sciences: Accepted by Colleges and Universities of the United States and Canada Volume 30
by Wade H. ShaferMasters Theses in the Pure and Applied Sciences was first conceived, published, SIld disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna and broader dissemination. tional publishing house to assure improved service Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 30 (thesis year 1985) a total of 12,400 theses titles from 26 Canadian and 186 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work.
Masters Theses in the Pure and Applied Sciences: Accepted by Colleges and Universities of the United States and Canada Volume 31
by Wade H. ShaferMasters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thougtit that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 31 (thesis year 1986) a total of 11 ,480 theses titles trom 24 Canadian and 182 United States universities. We are sure that this broader base tor these titles reported will greatly enhance the value ot this important annual reterence work. While Volume 31 reports theses submitted in 1986, on occasion, certain univer sities do re port theses submitted in previousyears but not reported at the time.
Masters Theses in the Pure and Applied Sciences: Accepted by Colleges and Universities of the United States and Canada. Volume 33
by Wade H. ShaferMasters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Oata Analysis and Synthesis (CINOAS) * at Purdue. University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 33 (thesis year 1988) a total of 13,273 theses titles from 23 Canadian and 1 85 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 33 reports theses submitted in 1988, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Masters Theses in the Pure and Applied Sciences: Accepted by Colleges and Universities of the United States and Canada Volume 32
by Wade H. ShaferMasters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 32 (thesis year 1987) a total of 12,483 theses titles from 22 Canadian and 176 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 32 reports theses submitted in 1987, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Masters Theses in the Pure and Applied Sciences: Accepted by Colleges and Universities of the United States and Canada Volume 38
by Wade H. ShaferMasters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 38 (thesis year 1993) a total of 13,787 thesis titles from 22 Canadian and 164 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 38 reports theses submitted in 1993, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.
Masters Theses in the Pure and Applied Sciences: Accepted by Colleges and Universities of the United States and Canada Volume 37
by Wade H. ShaferMasters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the though that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemi nation. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 37 (thesis year 1992) a total of 12,549 thesis titles from 25 Canadian and 153 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 37 reports theses submitted in 1992, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.
Masters Theses in the Pure and Applied Sciences: Accepted by Colleges and Universities of the United States and Canada Volume 36
by Wade H. ShaferMasters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 36 (thesis year 1991) a total of 11,024 thesis titles from 23 Canadian and 161 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 36 reports theses submitted in 1991, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Mastery in primary science (Exploring the Primary Curriculum)
by Deborah Wilkinson Wayne StallardWhat does 'mastery' look like in primary science? How can teachers plan for, assess and evidence it? This book explores how ‘rich’ learning tasks that enable children to apply, analyse, evaluate, and/or create to solve exciting and novel problems support the development of mastery level knowledge and skills in primary science. - Outlines how to recognise and use assessment opportunities - Focuses on the development of conceptual understanding - Highlights and demontrates the importance of teacher questioning - Explores the theories behind 'mastery' for primary science
Mastery in primary science (Exploring the Primary Curriculum)
by Deborah Wilkinson Wayne StallardWhat does 'mastery' look like in primary science? How can teachers plan for, assess and evidence it? This book explores how ‘rich’ learning tasks that enable children to apply, analyse, evaluate, and/or create to solve exciting and novel problems support the development of mastery level knowledge and skills in primary science. - Outlines how to recognise and use assessment opportunities - Focuses on the development of conceptual understanding - Highlights and demontrates the importance of teacher questioning - Explores the theories behind 'mastery' for primary science
Mastication Robots: Biological Inspiration to Implementation (Studies in Computational Intelligence #290)
by Weilang Xu John E. BronlundMastication Robotics: Biological Inspiration to Implementation is the first book in the special field of masticatory robots for applications including foods texture analysis, dental training and speech therapy. It is a collection of the efforts we have made in the field at Massey University, New Zealand. The book provides a thorough review of the human masticatory system, and presents principles, analysis, design, simulations and experiments of a number of masticatory robots developed by the authors. This book is a valuable reference for researchers, engineers and graduates in the field of robotics, mechatronics, automatic control, artificial intelligence and food sciences.
Mastitis Control in Dairy Herds
by Roger Blowey Peter EdmondsonMastitis in dairy herds is a worldwide problem, with significant implications for milk yields and quality, economic losses, and animal health and welfare. Effective control makes a considerable difference to the farmer and the animal, and this new edition includes updated information throughout as well as new chapters covering organic dairy herds, dry period infections, robotic milking, residue avoidance, and best practice procedures. The authors, both fellows of the Royal College of Veterinary Surgeons and recognised experts in the field, provide basic principles relevant to farmers, vets and veterinary students in a clear and practical way, covering anatomy, epidemiology, milking machines, disinfection, somatic cell counts, and diseases of the udders and teats in order to provide a thorough understanding of the causes of mastitis and measures of control and prevention. It is an indispensable resource for large animal vets, dairy industry personnel, farm managers, dairy herdsmen, and researchers and students in animal sciences and related disciplines.
Mastodon For Dummies
by Chris Minnick Michael McCallisterA little birdy told us you needed to know more about Mastodon Ready to escape the drama of existing social media platforms and try something new and awesome in the world of social media? In Mastodon For Dummies, experienced tech trainers Chris Minnick and Mike McCallister show you exactly how to use Mastodon, the hot decentralized social media offering on the web and destination for thousands of social media migrants. Learn how to sign up for the service on your choice of server and get familiar with the rules of what’s sure to become your new favorite app. You’ll discover how to connect with other people, attract your own followers, and make yourself right at home in the Mastodon community. In the book, you’ll find: Easy-to-follow instructions on how to choose the Mastodon server that suits you best Instructions for establishing new connections on a new social platform and learning the rules of the road Tips for conducting business on Mastodon and making a home for your home-based business or brand on the social media service Step-by-step guides on launching your very own serverIf you’re ready to leave old social platforms in the rear-view and try something new, grab a copy of Mastodon For Dummies.
Mastodon For Dummies
by Chris Minnick Michael McCallisterA little birdy told us you needed to know more about Mastodon Ready to escape the drama of existing social media platforms and try something new and awesome in the world of social media? In Mastodon For Dummies, experienced tech trainers Chris Minnick and Mike McCallister show you exactly how to use Mastodon, the hot decentralized social media offering on the web and destination for thousands of social media migrants. Learn how to sign up for the service on your choice of server and get familiar with the rules of what’s sure to become your new favorite app. You’ll discover how to connect with other people, attract your own followers, and make yourself right at home in the Mastodon community. In the book, you’ll find: Easy-to-follow instructions on how to choose the Mastodon server that suits you best Instructions for establishing new connections on a new social platform and learning the rules of the road Tips for conducting business on Mastodon and making a home for your home-based business or brand on the social media service Step-by-step guides on launching your very own serverIf you’re ready to leave old social platforms in the rear-view and try something new, grab a copy of Mastodon For Dummies.
Matching Properties of Deep Sub-Micron MOS Transistors (The Springer International Series in Engineering and Computer Science #851)
by Jeroen A. Croon Willy M Sansen Herman E. MaesMatching Properties of Deep Sub-Micron MOS Transistors examines this interesting phenomenon. Microscopic fluctuations cause stochastic parameter fluctuations that affect the accuracy of the MOSFET. For analog circuits this determines the trade-off between speed, power, accuracy and yield. Furthermore, due to the down-scaling of device dimensions, transistor mismatch has an increasing impact on digital circuits. The matching properties of MOSFETs are studied at several levels of abstraction: A simple and physics-based model is presented that accurately describes the mismatch in the drain current. The model is illustrated by dimensioning the unit current cell of a current-steering D/A converter. The most commonly used methods to extract the matching properties of a technology are bench-marked with respect to model accuracy, measurement accuracy and speed, and physical contents of the extracted parameters. The physical origins of microscopic fluctuations and how they affect MOSFET operation are investigated. This leads to a refinement of the generally applied 1/area law. In addition, the analysis of simple transistor models highlights the physical mechanisms that dominate the fluctuations in the drain current and transconductance. The impact of process parameters on the matching properties is discussed. The impact of gate line-edge roughness is investigated, which is considered to be one of the roadblocks to the further down-scaling of the MOS transistor. Matching Properties of Deep Sub-Micron MOS Transistors is aimed at device physicists, characterization engineers, technology designers, circuit designers, or anybody else interested in the stochastic properties of the MOSFET.
Matching Theory for Wireless Networks (Wireless Networks)
by Zhu Han Yunan Gu Walid SaadThis book provides the fundamental knowledge of the classical matching theory problems. It builds up the bridge between the matching theory and the 5G wireless communication resource allocation problems. The potentials and challenges of implementing the semi-distributive matching theory framework into the wireless resource allocations are analyzed both theoretically and through implementation examples. Academics, researchers, engineers, and so on, who are interested in efficient distributive wireless resource allocation solutions, will find this book to be an exceptional resource.
Material Aspects of Ferrofluids
by R. P. Pant Vidya Nand Singh Komal Jain Arvind GautamFerrofluids are smart materials possessing high controllability over its sensing and actuations behaviour which makes them suitable for contemporary technology. This book provides a comprehensive and accessible account of the material aspects of ferrofluids and its composites. It covers all the aspects of ferrofluids from physical to colloid stability factors, optical to thermal behaviour and rheological properties. An account of ferrofluid applications such as fine polishing, energy conversion, biomedical and further scope is presented. This book is indispensable for researchers, academicians and technologists working on magnetic nanosuspensions.
Material Aspects of Ferrofluids
Ferrofluids are smart materials possessing high controllability over its sensing and actuations behaviour which makes them suitable for contemporary technology. This book provides a comprehensive and accessible account of the material aspects of ferrofluids and its composites. It covers all the aspects of ferrofluids from physical to colloid stability factors, optical to thermal behaviour and rheological properties. An account of ferrofluid applications such as fine polishing, energy conversion, biomedical and further scope is presented. This book is indispensable for researchers, academicians and technologists working on magnetic nanosuspensions.
Material Balances for Chemical Reacting Systems
by S. Whitaker R.L. Cerro B.G. HigginsWritten for use in the first course of a typical chemical engineering program, Material Balances for Chemical Reacting Systems introduces and teaches students a rigorous approach to solving the types of macroscopic balance problems they will encounter as chemical engineers. This first course is generally taken after students have completed their studies of calculus and vector analysis, and these subjects are employed throughout this text. Since courses on ordinary differential equations and linear algebra are often taken simultaneously with the first chemical engineering course, these subjects are introduced as needed. Teaches readers the fundamental concepts associated with macroscopic balance analysis of multicomponent, reacting systems Offers a novel and scientifically correct approach to handling chemical reactions Includes an introductory approach to chemical kinetics Features many worked out problems, beginning with those that can be solved by hand and ending with those that benefit from the use of computer software This textbook is aimed at undergraduate chemical engineering students but can be used as a reference for graduate students and professional chemical engineers as well as readers from environmental engineering and bioengineering. The text features a solutions manual with detailed solutions for all problems, as well as PowerPoint lecture slides available to adopting professors.
Material Balances for Chemical Reacting Systems
by S. Whitaker R.L. Cerro B.G. HigginsWritten for use in the first course of a typical chemical engineering program, Material Balances for Chemical Reacting Systems introduces and teaches students a rigorous approach to solving the types of macroscopic balance problems they will encounter as chemical engineers. This first course is generally taken after students have completed their studies of calculus and vector analysis, and these subjects are employed throughout this text. Since courses on ordinary differential equations and linear algebra are often taken simultaneously with the first chemical engineering course, these subjects are introduced as needed. Teaches readers the fundamental concepts associated with macroscopic balance analysis of multicomponent, reacting systems Offers a novel and scientifically correct approach to handling chemical reactions Includes an introductory approach to chemical kinetics Features many worked out problems, beginning with those that can be solved by hand and ending with those that benefit from the use of computer software This textbook is aimed at undergraduate chemical engineering students but can be used as a reference for graduate students and professional chemical engineers as well as readers from environmental engineering and bioengineering. The text features a solutions manual with detailed solutions for all problems, as well as PowerPoint lecture slides available to adopting professors.